14 SEER R 410 A CONDENSER ONLY

The “new” refrigerant R410A that has been used to the replace the R22 older refrigerant that is being phased out has now been available for about 15 years. We are starting to see outdoor units that need replacement that have existing R410a indoor unit and coils that are still serviceable. Here is pricing for this application. You must have an existing R410a indoor coil, already running on R410a. If you have a replacement coil that is rated for R410a, but was used on an R22 system, the coil would have to be flushed very clean to remove the old mineral oil, which will react with the new R410a refrigerant. This would be an additional charge, which would depend on the type of coil, and what it would take to prepare it properly.

Work includes: Remove old unit, connect to existing copper, and electrical. Re-use existing slab. Leak check, vacuum pump system and adjust to proper charge. Re-use existing thermostat, indoor coil , furnace or air handler.

PRICES ARE FOR 14 SEER CONDENSER ONLY

OPTIONS:
NEW LIGHTWEIGHT CONCRETE PAD $90
NEW DISCONNECT BOX AND WHIP $145
SURGE / BROWN OUT PROTECTION $365 FOR HEAT PUMP $465

AC Service for the greater Houston area including Tomball, Cypress, Waller, Magnolia, Montgomery, Conroe, The Woodlands, Willis, Kingwood, Crosby, Huntsville, Galveston, Pearland, Brazoria, Sugarland, Richmond, Katy and Livingston.

We accept: